fb pixel

Your Craftsman Garage Door Opener and How To Fix It Today

Table of Contents

How To Fix Your Craftsman Garage Door Opener Today

You can always count on your Craftsman garage door opener—until it breaks. 

Garage door replacement Houston
Garage door replacement Houston

Picture this: despite pressing the button, the door remains immobile, despite your familiar hearing of the motor’s hum. Do not panic just yet; there are several common reasons why your Craftsman garage door opener is not really closing.

Causes and Measures To Fix Your Craftsman Garage Door Opener

Let’s have a look at the possible causes and the measures you may take to solve it on your own.

  1. Obstructed or Misaligned Safety Sensors

Nowadays, safety sensors are included in most modern garage doors. These usually protrude over the aperture and are located close to the base of your garage door tracks. To avoid mishaps, this invisible laser can detect an obstacle and halt or reverse the door accordingly.

The Fix:

  • Check for any objects blocking the sensor’s beam path; it could be toys, tools, or even a buildup of cobwebs.
  • Make sure the sensors are aligned correctly. They should be facing each other with their indicator lights glowing steadily. A slight bump can throw them off-kilter. Gently adjust them as needed.
  • Inspect the wires running from the sensors to the motor unit for damage or loose connections.
  1. Sensitivity Settings Out of Whack

One may customize the amount of force that triggers the automatic reversal feature of a garage door opener by adjusting the sensitivity settings. The opener could mistakenly reverse when it shouldn’t if the sensitivity is set too high, thinking it’s hitting an obstruction. Because of this, closing the door won’t be a smooth process.

The Fix:

  • Locate the “close force” adjustment knob on your Craftsman garage door opener’s motor unit. This is usually easy to spot.
  • Refer to your owner’s manual and slightly decrease the close force setting with a screwdriver. Test the door’s operation. Continue these small adjustments until the issue resolves.
  1. Remote Control Issues

Big-name parts are easy to point fingers at, but check to see whether the issue is with your remote control.

The Fix:

  • Change the battery. A weak remote battery can make the signal spotty, preventing the opener from receiving the “close” command properly.
  • If your opener features a lock button, ensure it’s not accidentally engaged. This deactivates the remote function.
  • If you have multiple remotes, try another one to rule out a faulty individual remote.
  1. Worn-out or Broken Motor Gears

To open and close the door, Craftsman garage door openers rely on gears. The plastic gears in particular might wear out with time. This causes the gear to slide or have problems engaging, leading to unreliable performance.

The Fix:

  • Gear replacement often requires a bit of mechanical skill. If you are comfortable with DIY repairs, you might be able to locate and replace the worn gear yourself by following your opener’s manual or online tutorials.
  • If not, or if the whole motor seems shot, it may be time to consult a garage door professional.
  1. Issues With Travel Limits

Garage door openers have settings that dictate how far the door should travel when opening and closing (“travel limits”). If these become misadjusted, the door may not close completely or may try to open past its intended stopping point.

The Fix:

  • Your owner’s manual will have detailed instructions on how to adjust the travel limit settings. It usually involves turning adjustment screws on the motor unit.
  • Make very small adjustments and keep testing until the door closes properly and rests flush with the ground.

Important Safety Reminders When Fixing Your Craftsman Garage Door Opener

  • Before you troubleshoot your garage door opener, be sure you disconnect it. Unintentional activation and potential harm can be avoided with this measure.
  • Turn off the door’s automatic opener. Before tinkering with the opener or door mechanism, be sure to use the emergency release cable.
  • Watch over kids and pets. They should never be allowed near or in the vicinity of the controls for the garage door opener. There is a high risk of major harm due to the door’s weight.
  • Consistent upkeep is essential. Look for damage or wear and tear on your garage door system at regular intervals. More serious difficulties and safety risks can be avoided if minor concerns are detected and addressed early on.

When to Call a Professional When Fixing Your Craftsman Garage Door Opener

Although you can usually resolve most common issues by yourself with some basic troubleshooting, there are instances when it’s best to call a garage door specialist for assistance. Get in touch with an expert if:

  • The problem persists after using the troubleshooting tips: A more involved problem could be at play if you’ve already attempted the aforementioned solutions and your Craftsman garage door opener is still not closing properly.
  • Damage is clearly visible. Repairing visible damage, such as frayed wire or broken springs, safely requires knowledge. If you try to fix it yourself, you can end up hurting yourself more.
  • You are not at ease or have any background. A garage door system could be somewhat intricate. Do not attempt to deal with the mechanical or electrical components if you are not comfortable doing so. An expert can complete the task securely and effectively.

 

Contact Easy Garage Door Repair today  and schedule a no-cost consultation and estimate. For more information, visit our website.