fb pixel

A Guide to Broken Garage Springs

Table of Contents

broken garage springs

Are you dealing with broken garage springs? Don’t worry. Broken garage springs are a common problem and can be fixed relatively easily! In this blog post, we’re going to help guide you through fixing a broken spring in your garage door by providing expert tips and advice and outlining the tools needed for successful repairs. By following the information provided in this post, your whole repair experience should become much easier! So please don’t wait any longer; let’s get started on our guide to repairing broken springs.

What are Broken Garage Springs, and How Do They Occur

Broken springs are a common problem caused by regular wear and tear or an accident. If your garage door appears not to balance properly, it may be a defect in one of the broken springs. These broken springs often result from broken internal wires due to fatigue, corrosion, and over-stretching, leading to safety hazards. Fixing broken springs can be difficult and dangerous as potentially hazardous high-tension forces are at play. For your safety, it is best to seek professional services when dealing with broken garage springs.

Common Signs That Indicate a Broken Garage Spring

Broken springs can become an issue in either manual or automated garage doors, leading to serious problems with the door’s operation. Without early detection and repair, broken springs can cause extensive damage to door components and potential danger for you and your family. Fortunately, there are several signs that broken springs may be present. The most common is when the door struggles to move or a loud banging occurs during opening and closing operations. Springs may also break or stretch apart, making them visible as broken pieces beneath the door. Additionally, if it becomes difficult to engage the automated opener, this might indicate broken springs too. If any signs appear, keep a keen eye on your garage door and immediately contact a professional service provider.

How to Prevent a Broken Garage Spring

Broken garage springs are an unfortunately common and potentially dangerous problem. To prevent them from occurring, first, make sure you never store too much weight inside your garage so that you don’t overexert the spring. Additionally, inspect the springs for wear and tear every few months – if there are any broken parts or rust on the metal, it is time to replace the springs. If your broken garage springs happen to stick, try closing the door manually, either by hand or with vice grips, while slowly unwinding the broken spring with another pair of vice grips. Doing this safely requires caution and proper knowledge of handling broken springs, so be aware before trying this method. Preventative measures can save some major headaches in the future, so keep these tips in mind.

Diy Solutions for a Broken Garage Spring

Broken garage springs can be a tricky repair, but with the right knowledge, it is possible to handle the project yourself successfully. Before taking on this task, be sure to check your repair manual for any specific instructions for your garage door opener model and any safety precautions. Gather the necessary tools, such as pliers and locksmithing equipment, and assess the broken spring you will replace. Once all closure components, including brackets and winding cones, are in place, carefully wind the springs onto their shafts while holding the tension to ensure full compression. Taking these steps will help repair broken springs safely and with confidence.

The Importance of Hiring an Expert

If you own a garage door, broken springs can be a serious problem and must be repaired quickly and efficiently. Trying to repair garage springs on your own can lead to costly repairs down the line and even safety hazards, making it important for homeowners to find an expert to take care of the job. Knowledgeable technicians who have experience with broken springs understand exactly how these components work and are equipped with specialized tools needed for a successful repair or replacement. In addition, they provide quality parts that have longer warranties than those purchased from big box stores, saving you money in the long run. Hiring an experienced expert is essential for dealing safely and accurately with broken garage spring issues.

Safety Tips When Dealing With a Broken Garage Spring

When dealing with broken garage springs, it is important to assess the situation carefully and take the appropriate safety measures. Garage springs are heavy and powerful components that can cause serious injury if not handled properly. It is critical to recognize the potential for harm and don by wearing protective gear like safety glasses, gloves, and trousers. Additionally, the broken parts have fallen out of place. In that case, it is strongly advised to call a professional service provider promptly to avoid possible injury to you or your loved ones.


The risks of dealing with broken garage springs can be significantly lessened if the right steps are taken for prevention, repair, and replacement. Since these springs can be quite dangerous when touched or handled improperly, it is always advisable to call a professional technician trained in repairing or replacing them safely. A broken garage spring should not be taken lightly and should be fixed promptly. If you need assistance with your broken garage spring, contact us at Easy Garage Door Repair as soon as possible. We have dedicated technicians ready to help ensure that your new spring’s repair and installation occur effectively and without risk.